HjemUnterhaltungselektronikEnergiequelle60A 30A Solarladeregler 12V 24V 48V PWM PV-Regler WiFi-APP-Monitor für Blei-Säure-Lithium-Eisenphosphat-Batterie
60A 30A Solarladeregler 12V 24V 48V PWM PV-Regler WiFi-APP-Monitor für Blei-Säure-Lithium-Eisenphosphat-Batterie
Lignende varer
Sponsoreret
60A 30A Solarladeregler 12V 24V 48V PWM PV-Regler WiFi-APP-Monitor für Blei-Säure-Lithium-Eisenphosphat-Batterie
DKK112.84DKK144.31
DKK250 AF For ordrer DKK2,500
DKK200 AF For ordrer DKK1,999
DKK130 AF For ordrer DKK1,299
DKK90 AF For ordrer DKK889
Farbe : Auto 12V 24V 48V 10A
Mængde :
Køb det nu
Tilføj til kurv
Rapport
Inkluder krænkelse af ophavsretGratis standard forsendelse. Se detaljer
Estimeret mellem Sun, May 25 og Wed, May 28
Du kan returnere produktet inden for 30 dage efter modtagelsen. Se detaljer
Shop med tillid
Penge-tilbage-garanti
Få den vare, du har bestilt, eller dine penge tilbage. Få flere oplysninger
Flere detaljer
60A 50A 40A 30A 20A 10A PWM Solar Charge Controller, Auto 48V 24V 12V Battery Regulator with Color LCD Display, WIFI APP Monitor Charge Controller for Solar Panels, Suit Lead-Acid & Lifepo4&Lithium Battery
The advantage of product
1. Industrial building is a source.
2. Large screen, LCD display, adjustable charge and discharge parameters.
3. Complete 3-internship DWM charging management.
4. Built-in near-charge protection, short-circuit protection, open-circuit protection, and reverse connection protection,all self-recovery and will not damage the controller.
5.Dual USB ports make charging more flexible.
6. WIFI APP can check and set it at any time.
7. Battery temperature detection function (optional).
8.Our controller can be used internary lithium battery, lithium iron phosphate and Lead-acid battery
Advice for safe use
1.This charge controller is 12/24/48V auto identified, Make sure your battery has enough voltage for the controller to recognize the battery type before frst installation.
2.The battery cable should be as short as possible to minimize loss, to avoid affecting the judgment of normal voltage
3. This controller is suitable for Lithium Ternary, LiFePo4 and Lead acid battery.
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
5.The controller will generate heat when it is running, please pay attention to install the controller on a flat, well-ventilated surface.
How to connect our conroller?
1. Connect the battery to the controller. It is recommended to add an air switch between the controller and the battery to protect the controller and the battery. When the controller is connected to the battery, the LCD screen will display the parameters, and then set the battery type.
2. If you need DC output to control the load, set the output control mode first, and then turn on the DC output disconnect switch.
3. Connect the solar panel PV to the controller, if the PV input voltage is at the controller’s
Within the charging working range, the controller will enter the charging state.
4. It is recommended that the controller add an air switch to the battery, solar panel and load to play a protective role.
5. Size of product:
10/20A: 115*145*57MM
30/40A: 135*170*70MM
50/60A: 155*197*86MM
Product parameters:
Model
PV-10A
PV-20A
PV-30A
PV-40A
PV-50A
PV-60A
Rated charging current
10A
20A
30A
40A
50A
60A
Rated discharge current
10A
20A
30A
40A
50A
60A
MAX PV Volt
12V system <25V/24V system <50V/48V system <100V
The USB output
5V2AMAX
Stand-by Curent
12V< 80ma, 24V< 45ma, 48V< 30ma
12V< 80ma, 24V< 45ma, 48V< 30ma
12V< 150ma, 24V< 80ma, 48V < 50ma
Dimensions
115*145*57mm
135*170*70mm
155*197*86mm
Work Temperature
0 degree to to 50 degree
Lead-acid battery /BAT/ B1
System Volt
12V system
24Vsystem
48Vsystem
Float charging Volt
Default 14.4V
adjustable range
13-15V
Default 28.8V
adjustable range
26-30V
Default 57.6V
adjustable range
52-60V
Discharge cut-off Volt
Default 10.7V
adjustable range
9.5-11V
Dofaut 21.4V
adjustable range
19-22V
Default 42.8V
adjustable range
38-44V
Discharge recovery Volt
Default 12.6V
adjustable range
11.5-13V
Default 25.2V
adjustable range
23-26V
Default 50.4V
adjustable range
46-52V
Ternary lithium battery /LIT1/ B2
System Volt
12V system 3 strings
24V system 7 strings
48V system 13 strings
Float charging Volt
Default 12.6V
Unadjustable
Defaultl 29.4V
Unadjustable
Default 54.6V
Unadjustable
Discharge cut-off Volt
Defat 9V
adjustable range
9-10.5v
Detfault21V
adjustable range
21-24.5V
Default 39V
Adlustable range
39-45.4
Discharge recovery Volt
Default 10.5V
adjustable range
10.5-11.7v
Default24. 5V
adjustable range
24.5-27.3V
Default 45.4V
Adjustable range
45.5-50.7V
Lithium iron phosphate battery /LIT2/ B3.
System Volt
12V system 3 strings
24V system 7 strings
48V system 13 strings
Float charging Volt
Defult 14.6V
Unadjustable
Default 29.2V
Unable
Default 58.4V
Unaqustable
Discharge cut-off Volt
Detaut 11.8V
Adjustable range
11.8-12.5V
Default 23.6V
Adjustable range
23.6-25V
Detaut. 47.2V
Adstable Range
47.2-50V
Discharge recovery Volt
Default 12.5V
Adyustabie range
12.5-13.5V
Default 25V
Adjustable range
25-27V
Default 50V
Adjustable range
50-54V